Natur-Magnet Modules

Description

Attention! The modules are sold separately.

A modular concrete and sand ant farm that provides a natural, moisture-retaining environment for ants. Each module can connect to others via magnetic attachments. Connections can be made at the top or on the sides, allowing for as many different configurations as desired.

– Nest module: a 15x10x7 cm formicarium made of concrete and sand. It features four 12 mm external connection ports (one at the top, one at the bottom, and one on each side) and four 12 mm plugs. The internal water reservoir has a 25 ml capacity (lasting approximately 20–25 days). You can choose between two different designs: Nest-1 or Nest-2.

– Módulo nido calefactado: hormiguero de 15x10x7 cm de hormigón y arena. Cuenta con un separador de galerías (ojo, al ser un entorno natural de hormigón y arena pueden quedar huecos por los que hormigas pequeñas pueden pasar a otros compartimentos), 4 conexiones con el exterior de 12 mm (una en la parte superior, otra en la parte inferior y otra a cada lado) y 4 tapones de 12 mm. El sistema de calefacción mantiene el hormiguero a la temperatura previamente definida. Ver modo de empleo del sistema de calefacción (*)

– Foraging box module: 15x10x7 cm box with a concrete and sand base. It features a double lid, three 12 mm external connection ports, and three 12 mm plugs.

– Red filter with an opening for refilling the reservoir without removing it

– Magnetic water feeder: with an 8 ml reservoir

– Attachment: expansion area measuring 7×4 cm with a height of 2×8 cm. It can be used as a waste area or a feeding unit by placing food inside the attachment and connecting it to the nest or foraging area.

*Instructions for use of the heating system:

The temperature marked in red is the temperature of the anthill.

The temperature marked in blue is the desired temperature for the ant farm.

The heating system will operate until the temperature of the ant nest equals the desired temperature.

To set the target temperature, press the “set” button. The target temperature will begin to flash. You can increase the temperature by pressing the “set” button. To lower the temperature, press the ºC/ºF button. Once the desired temperature is set, press the “set” button again.

Here you can watch some videos reviewing these ant farms and their modules: