Acrylic anthill with a concrete and sand base and an evaporation-based humidity system via a metal mesh. The reservoir level is visible from the outside, and it can be refilled using a syringe.

– Nest module: 16x8x4 cm ant farm made of concrete and sand. Includes connecting parts.

– Foraging box module: 16x8x8.8 cm box with a concrete and sand base. Includes connection parts.

– Red filter

Here you can watch some videos reviewing these ant farms and their modules:

You can see this ant farm in the videos by ANTenas and La Bichoteca:

La entrada Natur-EXTC Modules se publicó primero en Hormigueando | Tienda especializada en Cría de Hormigas.

Modular concrete and sand ant farm that provides a natural, moisture-retaining environment for the ants. Each module can connect to the others and to the foraging box via magnetic connections.

– Nest module: 12x12x3 cm ant farm made of concrete and sand. It features three gallery dividers, four 12 mm external connection ports, and four 12 mm plugs.

– Foraging box module: 12x12x9 cm box with a concrete and sand base. It features a double lid, four 12 mm external connection ports, and three 12 mm plugs.

– Red filter

Here you can watch some videos reviewing these ant farms and their modules:

– Quick review of the NATUR-MAGNET H ant farm:

Other videos:

La entrada Natur-Magnet-H Modules se publicó primero en Hormigueando | Tienda especializada en Cría de Hormigas.

A modular concrete and sand ant farm that provides a natural, moisture-retaining environment for ants. Each module can connect to others via magnetic attachments. Connections can be made at the top or on the sides, allowing for as many different configurations as desired.

– Nest module: a 15x10x7 cm formicarium made of concrete and sand. It features four 12 mm external connection ports (one at the top, one at the bottom, and one on each side) and four 12 mm plugs. The internal water reservoir has a 25 ml capacity (lasting approximately 20–25 days). You can choose between two different designs: Nest-1 or Nest-2.

– Módulo nido calefactado: hormiguero de 15x10x7 cm de hormigón y arena. Cuenta con un separador de galerías (ojo, al ser un entorno natural de hormigón y arena pueden quedar huecos por los que hormigas pequeñas pueden pasar a otros compartimentos), 4 conexiones con el exterior de 12 mm (una en la parte superior, otra en la parte inferior y otra a cada lado) y 4 tapones de 12 mm. El sistema de calefacción mantiene el hormiguero a la temperatura previamente definida. Ver modo de empleo del sistema de calefacción (*)

– Foraging box module: 15x10x7 cm box with a concrete and sand base. It features a double lid, three 12 mm external connection ports, and three 12 mm plugs.

– Red filter with an opening for refilling the reservoir without removing it

– Magnetic water feeder: with an 8 ml reservoir

– Attachment: expansion area measuring 7×4 cm with a height of 2×8 cm. It can be used as a waste area or a feeding unit by placing food inside the attachment and connecting it to the nest or foraging area.

*Instructions for use of the heating system:

The temperature marked in red is the temperature of the anthill.

The temperature marked in blue is the desired temperature for the ant farm.

The heating system will operate until the temperature of the ant nest equals the desired temperature.

To set the target temperature, press the “set” button. The target temperature will begin to flash. You can increase the temperature by pressing the “set” button. To lower the temperature, press the ºC/ºF button. Once the desired temperature is set, press the “set” button again.

Here you can watch some videos reviewing these ant farms and their modules:

La entrada Natur-Magnet Modules se publicó primero en Hormigueando | Tienda especializada en Cría de Hormigas.